Ic Card Reader Full Encryption And Decryption Intelligent Access Control Card

Description --> Feature: 100% new high quality. The Elechouse Proxmark3 Dev Kit 2 (RDV2) is the most recent addition to the Proxmark family. This redesign offers increased portability through smaller board dimensions and support for an on-board battery (sold separately). The main board measures a mere 82 mm x 38 mm. Unfortunately, this version is not open source at the moment but a schematic for its predecessor, the RDV1 is available online.

Inside the box you'll find an Elechouse Proxmark3, PCB Sandwich Enclosure Assembly, 125kHz LF Antenna, 13.56Mhz HF Antenna, MMCX antenna cables, Power Cable, and Tag Bundle. The specific tags included in the bundle can be found under the Specifications tab. The Proxmark client software and firmware are open source and available for download. The RDV2 ships preprogrammed running Asper's binary builds. See the links tab for client software builds.

In The Box: Elechouse Proxmark3, Enclosure Assembly, LF Antenna, HF Antenna, MMCX antenna cables, Power Cable, Tag Bundle. Tag Bundle: Mifare 1 S50, Mifare Ultralight, Chinese Magic Card 1K, HID Tag, T5577, and EM4X tag Firmware: v2.0.0 Dimensions: 82 mm x 38 mm Battery Connector: JST 2.54mm Made In: China Software Binaries for version 2.0.0 Source Code 1. Instructions for Standard/Proxmark 3 RDV2 Emulating/Cloning/Proxbrute HID Tags in Standalone Mode 2.Source file and compiled firmware Mifare Hack Video ELECHOUSE Proxmark3 V2 is upgraded from ELECHOUSE Proxmark3 V1. You could know more from the V1 page. What is improved on V2: Improvement More information Improved antennas LF antenna: 35.23 V @ 125.00 kHz LF antenna: 27.64 V @ 134.00 kHz LF optimal: 35.39 V @ 127.66 kHz HF antenna: 24.08 V @ 13.56 MHz 512KB of dual bank flash memory AT91SAM7S512 instead of AT91SAM7S256 on V1 Add power indicator LED Enhanced antenna wires Improved shell Install the antenna on the shell